double shear

英 [ˈdʌbl ʃɪə(r)] 美 [ˈdʌbl ʃɪr]

网络  双剪切; 双剪

机械



双语例句

  1. Transformation of Adding Free Roll in Front of Double Cut Shear of Hot Galvanized Line
    热镀锌线双切剪前增加自由辊的改造
  2. The shear walls with some new structural measures are summarized in this paper, especially a new double composite shear wall will be introduced.
    本文对几种采用不同构造措施的剪力墙作了简要介绍,特别是介绍一种新型双重组合剪力墙。
  3. The double shear creep specimens and modeling turbine blades have been experimented for the validation of the model.
    用双剪切试样和模拟叶片等系列试验对模型和有限元进行考核。
  4. FEM Analysis of Stress and Strain on Double Shear Specimens of Metal Matrix Composites at High Temperature
    高温下的金属基复合材料双剪切试样应力应变有限元分析
  5. Study to the Experiment of Double Shear at Orignal Place in Multiple Hole Brick Weight-Bearing Wall
    砖混住宅多孔砖承重墙原位单砖双剪试验研究
  6. Stress control in hollow cylindrical torsional specimen for study of double shear unified strength
    双剪统一强度研究的扭剪试验应力路径与控制
  7. A Mechanical Analysis for Concrete Testing Method of Modified Double Shear
    对砼改良双面剪切实验方法的力学分析
  8. Testing the shear strength of masonry by the method of double shear in situ on brickwork wall
    用原位双剪法检测砌体抗剪强度
  9. Based on nine experiments on edge joints of steel fiber concrete frame, the failure process and characteristics of the joints are studied, and the mechanism model of double shear-compression zone at joint core for shear capacity calculation is presented.
    通过9个钢纤维混凝土框架边节点的试验,研究了此类节点的破坏过程与破坏特点,提出了节点核心区抗剪计算的双剪压受力机理模式。
  10. Improved expressions of two-parameter double shear unified failure criterion with nonlinear failure envelopes and their behavior analysis
    具有非线性强度包络线的双剪双参数统一强度准则改进式及其特征分析
  11. Application of the double shear specimens in the study of the creep damage and rupture of the nickel-base single crystal superalloys
    双剪切试样在镍基单晶合金蠕变变形损伤和寿命研究中的应用
  12. And this conclusion has also been verified by double shear creep deformation.
    此结论进一步得到一种带缺口剪切蠕变试验的验证。
  13. This article studies the influence of the bolt tightening torque on the fretting damage of LY12CZ aluminium alloy double shear lap bolted joint by experimental and conumerical analysis.
    从试验和数值分析两个方面研究了螺栓预紧力矩对LY12CZ铝合金双盖板对接螺纹联接件微动损伤的影响。
  14. Double shear experimental research on standard brick masonry samples strengthened with AFRP
    AFRP加固标准砖砌体试件双剪试验
  15. In this paper, double shear experiment on twenty-nine standard brick samples strengthened with AFRP was performed.
    本文对27个芳纶纤维布(AFRP)加固标准砖砌体试件进行了双剪试验研究。
  16. The dependency of soil strength parameter on the coefficient of intermediate principal stress is illustrated theoretically by using the generalized double shear criterion and can agree well with the experimental data.
    基于广义双剪强度准则,从理论上探讨了土的强度参数对于中主应力的依赖性,并与试验结果进行了对比。
  17. A procedure has been presented to evolve the parameters for the transversely anisotropic MMC materials, so that the double shear specimens can tested the transversely anisotropic material properties, some of which are difficult to get by the usual tensile specimens.
    提出了用双剪切实验结果来推得MMC蠕变性能和各向异性参数的方法,以便可以用双剪切实验来确定那些很难用拉伸和单向压缩实验确定的各向异性材料的参数。
  18. A mechanical analysis is conducted to the concrete testing method of modi-ficd double shear using plastic theory, the stress distribution on the limit state surface is presented Some cases of different boundary condition arc also discussed.
    本文利用塑性力学理论对硅改良双面剪切实验方法进行了力学分析,给出剪切面上的应力分布形式,并对不同边界条件的情况作了探讨。
  19. The experimental studies on frictional sliding of four kinds of rocks were made by the double shear test method.
    用双剪法对四种岩石的摩擦滑动特征进行了实验研究。
  20. Double shear creep specimens were investigated by the transverse anisotropic finite element method, in order to study the multiaxial creep behavior of short fiber-reinforced metal matrix composites ( MMCs).
    利用纵向各向异性有限元模型对双剪切试样的蠕变响应进行了有限元分析,其目的是为了研究双剪切试样用于短纤维金属基复合材料(MMC)蠕变响应研究的可行性。
  21. Improvement of double shear criterion and its applications to geotechnical engineering
    双剪统一强度准则改进及其在岩土工程中的应用
  22. The Elastic and Plastic Analysis of Double Shear Walls and Frame Shear Structures by Spline Method
    双肢剪力墙及框剪结构弹塑性分析的样条函数方法
  23. The ultimate line of the double shear strength theory in π plane is a polygonal line according to the double shear unified strength theory.
    双剪统一强度理论在π平面上的极限线为多条直线构成的折线,形式简单,应用方便。
  24. Using a more realistic boundary condition for loading ( ABAQUS option: CONTACT PAIR), the homogeneous state of shear stress in the double shear specimen is maintained throughout creep up to much higher shear strains than that of the originally estimated.
    利用更真实的边界条件(ABAQUS中的contactpair),能给出更均匀和更高应变时的精确性。
  25. Innovative technique of support mould for double shear wall in deform joint of high rise building
    高层建筑变形缝处双剪力墙支模的创新技术
  26. Application of the double shear creep specimens on the fiber-reinforced metal matrix composites
    双剪切试样用于短纤维金属基复合材料的蠕变响应研究
  27. Double shear experiment of rocks and study of seismic source-time function
    岩石的双剪摩擦及震源时间函数的实验研究
  28. Now, the friction coefficient is generally got from gouge test by using the double shear method.
    目前,断层摩擦系数主要是应用双剪法对采自断层的断层泥进行实验室测试和研究而取得的。
  29. The double shear specimen was designed for the study of the creep behavior of nickel base single crystal superalloys at high temperature.
    双剪切试样是设计用于研究镍基单晶超合金的蠕变问题。